Announcement PDF ASX Announcement auricmining 4 June 2024 ASX: AWJ | ACN 635 470 843 RC Drilling at Spargoville – Fugitive Prospect HIGHLIGHTS • Six-hole RC program completed at Fugitive Prospect. • Scissor holes lead to geological reinterpretation. • Results include 2m @ 3.82g/t Au, 3m @ 1.18g/t Au and 1m @ 6.08g/t Au within a broader mineralised zone. • Mineralised zone represents highly prospective target for further drilling. MANAGEMENT COMMENT Mr. Mark English, Managing Director: “The Fugitive Prospect is midway between two prominent, high-grade gold deposits; Wattle Dam and Spargos Reward at Spargoville. Our first-pass drilling has highlighted similarities with both deposits. We’re looking forward to the next phase when we will get the opportunity to test that model.” Mr. John Utley, Technical Director: “Historic drilling has outlined a zone of supergene gold mineralisation at Fugitive. Whilst there’s only sparse drilling below 50m vertical depth, we can see evidence for a plumbing system extending beneath the shallow mineralisation. It’s an enticing drill target, over almost 700 metres of strike length.” page | 1 +61 8 6155 9046 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) RC Drilling at The Fugitive Prospect. Photo 15 April 2024. THE ANNOUNCEMENT Auric Mining Limited (ASX: AWJ) (Auric or the Company) is pleased to announce that results have been returned for a small RC drilling program recently completed at the Fugitive Prospect, Spargoville Project, Western Australia. Geological logging and interpretation of the new holes show that lithological contacts and mineralisation controls dip to the west. Most of the historic drillholes were also inclined to the west but would have been more effective at defining mineralised geometry if drilled to the east. Nevertheless, the historic drillholes identified a zone of supergene (ie, remobilised) mineralisation in weathered rock. The current drilling which targeted mineralisation in fresh rock has defined significant mineralisation at a 0.5g/t Au cut-off beneath the supergene. That fresh rock mineralisation includes: ASRC001; 3m @ 1.18g/t Au from 69m and1m @ 6.08g/t Au from 82m ASRC003; 2m @ 3.82g/t Au from 96m ASRC005; 2m @ 2.78g/t Au from 114m The significant assays occur within a gold mineralised envelope confined to a basalt unit and defined by gold concentrations above 0.1g/t Au. The mineralised envelope has barely been tested in fresh rock. It has potential to host a gold deposit beneath the prominent auger-soil gold anomaly shown in Figure 1, at depth and/or along strike and represents a logical target for ongoing exploration. page | 2 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) Figure 1. The Fugitive Prospect, defined by auger-soil gold anomalism, with Auric and historic drill holes collars. page | 3 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) Fugitive Prospect Drilling The Fugitive Prospect lies within Auric’s Spargoville Project centred 4km west of the Coolgardie-Esperance Highway and 35km southwest of Kambalda. It is outlined by a large and prominent auger-soil anomaly and was targeted by previous explorers with RAB, Aircore and shallow RC holes (Figure 1). The prospect was described in a previous announcement1 which included a summary of drilling by earlier explorers Ramelius Resources Limited (Ramelius) and Tychean Resources Limited (Tychean). Historic drilling by Breakaway Resources Limited is summarised in this announcement (Appendices 2 and 3). The historic holes, with the exception of Ramelius’ holes at the southern end of the Fugitive Prospect, were inclined at 60˚ and drilled to the west implying that mineralisation dipped to the east. This orientation was uncertain and a key aspect of Auric’s drill planning was to obtain a better understanding of the orientations of lithological contacts and gold mineralisation as a precursor to further drilling. Six RC holes were drilled in the current program for a total of 822m by Kalgoorliebased Kennedy Drilling. All of the holes were sampled at 1m intervals via a fixedcone splitter and duplicate samples together with commercial standards submitted representing 10% of the total samples submitted for assay. A more detailed description of sampling techniques and various reporting criteria are included in JORC Table attached as Appendix 1. Four of the Auric holes were drilled as two pairs of scissor holes to potentially provide the orientation of lithological contacts. This was achieved with holes ASRC004 and ASRC005 (Figure 2) which show that the basalt-ultramafic contact dips steeply to the west. Future drill holes will be inclined to the east. Drill hole details for the Auric drill holes are shown in Table 1 and significant gold intersections at a 0.5g/t cut-off in Table 2. Significant intersections in fresh rock are associated with quartz veining and with trace to 2% sulphides, predominantly pyrite but also including pyrrhotite and sphalerite in several intervals. Historic drill intercepts included 25m @ 1.67g/t Au from 44m in Tychean aircore drill hole SPAC142. The majority of the historic drill holes, including SPAC142, were drilled to blade-refusal, typically ending in partially oxidised rocks and the broad intercepts in those holes are interpreted to represent supergene ie, remobilised gold mineralisation in the weathered rock. The deeper drilling in the Auric RC holes and an earlier Tychean RC hole (SPRC027) have intersected narrow zones of gold mineralisation at a 0.5g/t cut-off within a broader mineralised envelope (Figures 2 and 3). 1 (ASX:AWJ): 2 March 2021. Auric Mining Limited Resources Summary and Exploration Update page | 4 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) The mineralised envelope corresponds with the strong auger-soil gold anomaly at surface and with gold mineralisation intersected in historic drill holes over an almost 700m strike length – it represents a logical focus for further drilling. The target in this area is a substantial deposit such as the 185,000oz Spargos Reward gold deposit2 8km to the north of Fugitive or the 266,000oz Wattle Dam gold deposit3 8km to the south east. Table 1. Auric RC Drillhole Details Hole_ID Type Hole Depth (m) ASRC001 RC 140 353150 6534750 390 -60 270 ASRC002 RC 140 352880 6535240 390 -60 090 ASRC003 RC 140 353015 6535234 390 -60 270 ASRC004 RC 138 352860 6535360 390 -60 090 ASRC005 RC 138 352971 6535360 390 -60 270 ASRC006 RC 126 352666 6535663 390 -60 090 MGA_East MGA_North Orig_RL Dip MGA_Azi Table 2. Auric Drill Holes - Significant gold intersections at 0.5g/t cut-off Hole ID From (m) To (m) Downhole Interval (m) Au (g/t) ASRC001 0 1 1 1.83 ASRC001 38 39 1 0.73 ASRC001 43 45 2 0.61 ASRC001 53 54 1 0.71 ASRC001 69 72 3 1.18 ASRC001 82 83 1 6.08 ASRC002 115 118 3 0.60 ASRC003 96 98 2 3.82 ASRC003 111 113 2 0.95 ASRC004 30 31 1 1.03 ASRC004 84 85 1 0.65 ASRC004 89 90 1 0.55 ASRC004 111 112 1 0.64 ASRC005 39 40 1 0.56 ASRC005 114 116 2 2.78 ASRC006 23 25 2 1.46 2 Technical Report (NI 43-101) 4 January 2024. Higginsville-Lakewood Operation Eastern Goldfields, Western Australia 3 Maximus Resources website – Company Overview – accessed 15 May 2024 page | 5 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) Figure 2. Fugitive Cross Section 6535360N – refer Figure 1 for location. Figure 3. Fugitive Cross Section 6535240N – refer Figure 1 for location. page | 6 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) Next Steps • Aircore drilling along several traverses toward centre of the prospect to infill current 100m drill traverse spacing in that area. • RC drilling beneath the historic and latest drill holes to target the mineralised zone in fresh rock approximately 75 to 100m and more below surface – note that all of the high grades at Wattle Dam occur below weathering. COMPLIANCE STATEMENT The information in this announcement that relates to exploration targets and exploration results is based on and fairly represents information and supporting documentation compiled by Mr John Utley, who is a full-time employee of Auric Mining Limited. Mr Utley is a Competent Person and a member of the Australian Institute of Geoscientists. Mr Utley has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Utley consents to the inclusion in the report of the matters based on his information in the form and context in which it appears. This announcement has been approved for release by the Board. Corporate Enquiries Mark English Managing Director Auric Mining Limited +61 409 372 775 menglish@auricmining.com.au Follow our communications Subscribe: auricmining.com.au page | 7 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) Appendix 1: Fugitive Prospect RC Drilling JORC Table 1 Checklist Section 1 Sampling Techniques and Data (Criteria in this section apply to the succeeding section) Criteria Sampling techniques JORC Code explanation Commentary Nature and quality of sampling (e.g. • RC drill samples were taken at 1m intervals via a cyclone and fixed cone cut channels, random chips, or splitter. Samples of nominally 2.5kg specific specialised industry standard were collected in calico bags and measurement tools appropriate to submitted to the Intertek Genalysis the minerals under investigation, such sample preparation facility in as down hole gamma sondes, or Kalgoorlie. Samples were pulverised handheld XRF instruments, etc). These to a nominal 85% passing 75µm. examples should not be taken as Approximately 200g of the pulverised limiting the broad meaning of product from each sample was then sampling. transferred to the Intertek Genalysis Include reference to measures taken facility in Perth. to ensure sample representivity and • Samples were analysed for Au via 50g the appropriate calibration of any fire assay with an ICP-OES measurement tools or systems used. determination of gold concentration Aspects of the determination of • The samples for each 1m interval mineralisation that are Material to the remaining after removal of the Public Report. nominal 2.5kg split were laid out in In cases where ‘industry standard’ rows at the drill site and this material work has been done this would be used for geological logging relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information. Drilling techniques Drill type (e.g. core, reverse circulation, • RC drilling using a face-sampling open-hole hammer, rotary air blast, hammer with a drill bit (hole) diameter auger, Bangka, sonic, etc) and details of approximately 133mm. (e.g. core diameter, triple or standard tube, depth of diamond tails, facesampling bit or other type, whether core is oriented and if so, by what method, etc). Drill sample Method of recording and assessing • Sample recovery is assessed as having been reasonable overall. Samples recovery core and chip sample recoveries and submitted for assay were weighed at results assessed. the lab and sample weights reported page | 8 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Logging Auric Mining Limited (ACN 635 470 843) Measures taken to maximize sample recovery and ensure representative nature of the samples. Whether a relationship exists between sample recovery and grade and • whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. Whether core and chip samples have • been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. Whether logging is qualitative or • quantitative in nature. Core (or • costean, channel, etc) photography. The total length and percentage of the relevant intersections logged. • – they show some small samples in the 1st few metres of drill holes, a maximum weight of 4.8kg and an average weight of 2.1kg There is no evidence of sample bias Drill chips were logged at 1m intervals corresponding to the sample intervals and according to Auric’s coding system in sufficient detail to support mineral resource estimation, mining studies and metallurgical studies. The logging is qualitative in nature. Chips were not photographed but a small proportion of chips from each interval have been retained in compartmentalised chip trays. The total length logged is 822m which is 100% of the drilled intervals • RC chips were sampled at 1m intervals via a fixed cone splitter and all samples were dry. • A duplicate sample was taken with every 15th sample using a 2nd chute on the splitter and a pulp standard was inserted after every 30 samples such that 10% of samples submitted for assay are either duplicates or standards. • The duplicate assays show reasonable correlation. • Sample sizes (nominally 2.5kg) were pulverised prior to subsampling of 50g for fire assay and are considered appropriate. Subsampling techniques and sample preparation If core, whether cut or sawn and whether quarter, half or all cores taken. If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. For all sample types, the nature, quality and appropriateness of the sample preparation technique. Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling. Whether sample sizes are appropriate to the grain size of the material being sampled. Quality of assay data and laboratory tests The nature, quality and • In addition to standards submitted by appropriateness of the assaying and Auric, the laboratory (Intertek laboratory procedures used and Genalysis) analysed standards and whether the technique is considered blanks inserted with each fire assay partial or total. batch. Comparison of expected results for standards with the assays For geophysical tools, spectrometers, received for the RC samples indicates handheld XRF instruments, etc, the accurate and precise laboratory parameters used in determining the data. analysis including instrument make and model, reading times, calibrations page | 9 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) factors applied and their derivation, etc. Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established. Verification of sampling and assaying The verification of significant intersections by either independent or alternative company personnel. The use of twinned holes. Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. Discuss any adjustment to assay data. • Anomalous assays have been verified by alternative Auric personnel. • No twinned holes have been drilled. • Field sample records are merged with assay results from the lab and various cross reference checks, both manual and computational used to ensure data integrity. • Data is stored on two separate computers and backed up routinely. • No adjustment has been made to assay data Location of Accuracy and quality of surveys used • Hole collar positions were located data points to locate drill holes (collar and downusing a hand-held GPS referenced to hole surveys), trenches, mine workings MGA-GDA94, Zone 51and are and other locations used in Mineral accurate to within 5m. Resource estimation. • Downhole surveys were taken by the Specification of the grid system used. drilling contractor using a gyro at approximately 10m intervals. Quality and adequacy of topographic • Collar surveys included an elevation control. measurement and are located within the MGA-GDA94 grid system, Zone 51 Data Data spacing for reporting of • 6 holes were drilled over a strike length spacing and Exploration Results. of approx. 1km within a prominent distribution auger-soil gold anomaly and Whether the data spacing and intercalated with historic, generally distribution is sufficient to establish the shallow drill holes. degree of geological and grade continuity appropriate for the Mineral • At this exploration stage, the data is Resource and Ore Reserve estimation dominated by historic drilling with procedure(s) and classifications insufficient QA to be incorporated into applied. a resource estimate. Whether sample compositing has been • No sample compositing applied. Orientation of data in relation to geological structure Whether the orientation of sampling • The current drilling has allowed a new achieves unbiased sampling of possible interpretation of the mineralisation structures and the extent to which this is geometry. As a consequence, it known, considering the deposit type. appears that mineralized intercepts in drill holes inclined at 60˚ to the west If the relationship between the drilling represent ~40% of true width and orientation and the orientation of key intercepts in holes inclined at 60˚ to mineralised structures is considered to the east represent ~70% have introduced a sampling bias, this page | 10 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) should be assessed and reported if material. Sample security The measures taken to ensure sample • Auric personnel were present during security. all drilling and sampling and individual samples were bagged and sealed in larger polywoven bags with no opportunity for tampering. • Samples were transported to the lab by Auric personnel Audits reviews or The results of any audits or reviews of • There have been no reviews of sampling techniques and data. sampling techniques and data related to the current program. page | 11 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Criteria Mineral tenement and land tenure status Section 2 Reporting of Exploration Results (Criteria listed in the preceding section also apply to this section) JORC Code explanation Commentary Type, reference name/number, location • RC drilling was conducted on and ownership including agreements or E15/1688 which is held by Spargoville material issues with third parties such as Minerals Pty Ltd, a wholly owned joint ventures, partnerships, overriding subsidiary of Auric Mining Ltd. royalties, native title interests, historical • There are no known impediments to sites, wilderness or national park and obtaining a licence to explore or environmental settings. mine in the area beyond routine The security of the tenure held at the time compliance requirements of reporting along with any known impediments to obtaining a licence to operate in the area. Exploration Acknowledgment and appraisal done by exploration by other parties. other parties Geology Auric Mining Limited (ACN 635 470 843) of • Auric have undertaken auger sampling within E15/1689 to complement earlier auger sampling by Breakaway resources. • All drilling within the Spargoville project prior to the current RC program was undertaken by other parties including 117 air core and RAB holes and 12 RC holes drilled by Ramelius Resources, Tychean Resources and Breakaway Resources. Deposit type, geological setting and • Previous companies have explored style of mineralisation. for both Au and Ni. • Au exploration references analogues to the ultramafic-hosted Wattle Dam Au deposit, 8km to the south of the Fugitive Prospect and to the sediment-hosted Spargos Reward Au deposit 8km to the north. Both of the deposits are shear hosted. • Ni has been targeted in ultramafic units with potential for komatiitehosted Ni-sulphide mineralisation analogous with deposits in the Widgiemooltha and Kambalda areas. • In the Fugitive Prospect, Au in fresh rock occurs within metabasalts and is associated within thin (<10cm) quartz veins and generally less than 2% sulphides, predominantly py page | 12 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Criteria JORC Code explanation Auric Mining Limited (ACN 635 470 843) Commentary Drill hole • A summary of all information material • Refer to: Information to the understanding of the Table 1: RC Drillhole Details exploration results including a Table 2: Significant gold intervals at tabulation of the following information 0.5g/t cut-off for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole. o down hole length and interception depth o hole length. If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. Data aggregatio n methods In reporting Exploration Results, • Samples were collected at 1m weighting averaging techniques, intervals and aggregate intervals maximum and/or minimum grade incorporate only 1m intervals. truncations (e.g. cutting of high grades) • Samples were aggregated at a and cut-off grades are usually Material 0.5g/t cut-off with no top-cut and should be stated. applied Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. The assumptions used for any reporting of metal equivalent values should be clearly stated. Relationship These relationships are particularly • Mineralisation widths are between between important in the reporting of Exploration 40% and 70% of down hole intercept mineralisation Results. lengths. widths and If the geometry of the mineralisation with intercept respect to the drill hole angle is known, its lengths nature should be reported. If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g. ‘down hole length, true width not known’). Diagrams Appropriate maps and sections (with • Refer to Figures 1-3 and Tables 1-2 scales) and tabulations of intercepts page | 13 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Criteria JORC Code explanation Auric Mining Limited (ACN 635 470 843) Commentary should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views. Balanced reporting Where comprehensive reporting of all • Reporting is balanced – only Exploration Results is not practicable, significant Au values at a 0.5g/t cutrepresentative reporting of both low and off are tabulated and this is high grades and/or widths should be acknowledged practiced to avoid misleading reporting of Exploration Results. Other substantive exploration data Other exploration data, if meaningful • Not applicable and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances. Further work The nature and scale of planned further • At the Fugitive Prospect, further RC work (e.g. tests for lateral extensions or drilling will target an Au-mineralized depth extensions or large-scale step-out envelope hosted within a basalt unit drilling). defined in fresh rock, beneath most of the historic drilling. Further drilling Diagrams clearly highlighting the areas may also be used to quantify of possible extensions, including the main supergene mineralization within the geological interpretations and future weathered profile. drilling areas, provided this information is not commercially sensitive. page | 14 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 Auric Mining Limited (ACN 635 470 843) Appendix 2: Breakaway Resources – Spargoville Project RAB, RC and Diamond Drill Hole Details (Including Significant Assays at 0.5g/t Cut-off) E15/1688 and E15/1689 Breakaway Resources RAB, RC and Diamond Drill Hole Location Easting Northing Orientation Hole Depth Dip/Azi (m) 06KWRB055 06KWRB056 06KWRB085 06KWRB086 06KWRB087 06KWRB088 06KWRB089 06KWRB090 06KWRB091 06KWRB106 06KWRB107 06KWRB108 06KWRB109 06KWRB110 353031.76 353133.76 354042.765 354137.766 353647.763 353728.764 353838.764 353937.765 354038.765 352520.756 352635.757 352733.757 352835.758 352941.758 6538555.202 6538550.202 6539167.205 6539161.205 6539365.206 6539357.206 6539357.206 6539354.206 6539352.206 6534557.183 6534549.183 6534553.183 6534557.183 6534557.183 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 11 13 2 2 12 38 2 2 5 44 33 31 26 38 06KWRB111 353042.759 6534556.182 -60/270 46 06KWRB112 06KWRB113 06KWRB114 06KWRB115 06KWRB116 06KWRB117 06KWRB118 06KWRB119 06KWRB120 06KWRB121 06KWRB122 06KWRB123 06KWRB124 06KWRB125 06KWRB126 06KWRB127 06KWRB128 06KWRB129 06KWRB130 06KWRB131 06KWRB132 06KWRB133 353143.759 352448.756 352548.757 352628.757 352736.757 352820.758 352912.758 353043.759 353121.759 353230.76 351830.754 351943.754 352036.755 352133.755 352233.756 351821.754 351934.754 352040.755 352132.755 352236.756 352328.756 351833.754 6534558.182 6534954.185 6534958.185 6534957.185 6535024.185 6534956.185 6534957.185 6534954.184 6534936.184 6534949.184 6537746.199 6537768.199 6537754.199 6537751.199 6537762.199 6537962.2 6537956.2 6537961.2 6537959.2 6537961.2 6537958.199 6538155.201 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 -60/270 44 62 49 50 55 35 18 51 48 28 56 50 47 16 35 43 59 62 38 29 53 34 Down-hole interval Interval Length Grade (m) (m) Au (g/t) NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI 0-8 8 1.54 36-40 2 0.6 0-4 4 1.35 36-40 4 0.66 NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI NSI page | 15 +61 8 9548 9997 | info@auricmining.com.au | Level 1, 1 Tully Road, East Perth, WA 6004 | www.auricmining.com.au ASX Announcement 4 June 2024 06KWRB134 06KWRB135 06KWRB136 06KWRB137 06KWRB138 BRC001 BRC002 BRC003 BRC004 BRC005 BRC006 BRC007 BRC008 351934.754 352040.755 352134.755 352242.756 352326.756 352968.759 352921.759 352816.758 352921.759 352966.759 352976.759 352911.759 352616.757 Auric Mining Limited (ACN 635 470 843) 6538149.201 6538162.201 6538159.201 6538162.201 6538159.2 6535807.189 6535807.189 6535807.189 6535932.189 6535932.189 6535707.188 6535707.188 6535662.188 -60/270 -60/270 -60/270 -60/270 -60/270 -60/90 -60/90 -60/90 -60/90 -60/90 -60/90 -60/90 -60/90 36 10 29 20 36 100 149 149 149 107 100 149 BRC009 BRC010 LFC0001 352966.759 352886.758 352994.759 6535777.189 6535918.189 6535231.186 80 241 80 149 -60/90 -63/100 -60/270 LFC0002 352955.759 6535237.186 80 -60/270 LFC0003 LFC0004 352996.859 352956.359 6535287.186 6535287.186 84 -60/270 -60/270 LFC0005 LFC0006 352976.559 352936.159 6535338.186 6535337.186 80 80 80 LFC0007 LFC0008 LFC0009 352896.458 352976.559 352937.259 6535336.186 6535386.187 6535386.187 80 80 80 -60/270 -60/270 -60/270 LFC0010 352896.158 6535386.187 80 -60/270 LFC0011 LFC0012 LFC0013 LFC0014 352970.959 352936.259 352897.758 352847.658 6535437.187 6535437.187 6535437.187 6535387.187 80 80 70 100 -60/270 -60/270 -60/270 -60/90 LFC0023 352986.559 6535334.186 80 -60/270 -60/270 -60/270 145147 36-41 45-46 76-78 8-10 28-32 38-39 49-51 13-14 54-57 31-32 39-40 44-50 52-53 59-61 19-20 17-19 37-38 70